LRX Single Par
6K, 12K, 18K Daylight or 10K, 12K Tungsten
Keeping your crew safe and your lights where you want them!
Weather Proof Robotic Fixtures
The LRX Single Par is a complete robotic lighting system. The LRX Single Par lamp fixtures are designed to work with existing cables, power supplies and industry standard dimmers.
Set-up is so efficient that it takes only minutes.
Switching the lamp fixture from Daylight (HMI) to Tungsten is handled automatically in the LRX Single Par, all you do is change the bulb and power supply; the LRX Single Par will do the rest. The LRX Single Par is so versatile it can be used as a daylight source at the beginning of the day and switched to an incandescent source part way through the workday in a matter of minutes.
The LRX Single Par lighting system comes complete with a robotic lighting head, integrated gel frame holders, DMX hardwire remote control, DMX cable and a shipping case. There is an optional condor mounting system and cable management system that is exclusive to LRX.
Each LRX Single Par fixture will accept a standard single-ended 6KSE* - 12KSE - 18KSE Daylight (HMI) bulb or 10KSE & 12KSE Tungsten bulb. For maximum unrestricted output, these lamps have paired with a radiant-engineered parabolic reflector that allows the lamp fixture a smooth transition between a very narrow spot and a smooth wide flood.
The lamp body is mounted to our robotic yoke, which provides a wide range of tilt, pan, spot & flood functions from a supplied hardwire remote control. The LRX Single Par can be mounted on most aerial lifts, cantilevered from rooftops, hung on grids, etc.
Once the fixture is in place, focusing can be done quickly & safely from the supplied hardwire DMX hand controller, optional wireless controller, or your DMX lighting console letting you put light exactly where you need it without the worry of operator safety, exposure or costly time delays created by accessibility issues.
The LRX Single Par gel frame holder is mounted to the front of the lamp housing so that it moves with the lamp as it moves thru its range of motion. The gel frame holder is engineered and constructed to quickly and easily accept any combination of color, diffusion, and heat shield on a thirty-inch square gel frame. Light reflected from the lamp side of the gel is prevented from escaping outside of the housing, so that the light is exactly where you want it.
* 6KSE Requires G38 socket extension or LRX 6KSE extended bulb.
NOW AVAILABLE WITH:
LRX Extreme Temperature Correction Filters
- ¼ CTO
- ½ CTO
- Full CTO
- Steel Blue
- Half White Diffusion (250)
- Cyan 60
Correction filters that never shift or burn out! More Info